ITP205is anindividual milking claw incorporating unique automatic shut-off valves which automatically control the vacuum supply to each liner during both milking and washing.

As soon as the teat enters the liner, the valve automatically opens. Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it.

This offers a range of benefits:
Fewer operations both during milking.
Less vacuum fluctuation
when liners are fitted and removed, thus avoiding undesirable consumption of vacuum and suck up of dirt.
Valves close automatically if the cluster is kicked off.
An unhealthy teat can be isolated during milking.
Easy to inspect for cleaning and maintenance.
High impact resistant materials are used to construct the milking claw

EMPLOYMENT
Fit the liner to the teat and the valve automatically opens. When you have finished milking, just pull the liner slightly to detach the unit: this lets in air which closes the valve. During washing the lever must be pushed down to prevent the valve from closing due to the water turbulence.