ITP207 is an individual milking claw incorporating unique automatic shut-off valves which automatically control the vacuum supply to each liner during both milking and washing.

As soon as the teat enters the liner, the valve automatically opens. Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it.

Benefits:

• Fewer operations both during milking.
• Less vacuum fluctuation
• New wool-stop cross in the milk inlet tube
• Less vacuum consuptions when liners are fitted and removed.
• Valves close automatically if the cluster is kicked off.
• An unhealthy teat can be isolated during milking.
• Easy to inspect for cleaning and maintenance.
• High impact resistant materials are used to construct the milking claw.

Fit the liner to the teat and the valve automatically opens. When you have finished milking, just pull the liner slightly to detach the unit: this lets in air which closes the valve. Washing is fully automatic.

ITP207 starts "normally closed", to prevent vacuum leakages at the activation of the Milking machine.